Implementasi Dt-51 Minsys Sebagai Pengendali Pony Binder Di PT. Dian Rakyat 2 Pulogadung-Jakarta Timur
Diwantara Sebastian1, S. Ratna Sulistiyanti2, Syaiful Alam2
1. PT. Huawei Tech Investment, Ged BRI 2, Lt 22
Jl. Jend. Soedirman kav. 44-46 Jakarta 10210
2. Jurusan Teknik Elektro Fakultas Teknik Universitas Lampung
Abstrak–Telah berhasil dibuat di PT. Dian Rakyat 2 kawasan Industri Pulogadung Jakarta Timur, pengendali mesin pony binder dengan mengimplementasikan mikrokontroler DT-51 Minsys Ver 3.3. sebagai pengendali utama. Metode yang dilakukan dalam penelitian ini adalah dengan membuat prototipe pengendali mesin pony binder. Dengan implementasi DT-51 MinSys Ver 3.3. sebagai pengendali, dapat mengurangi waktu yang diperlukan untuk memberikan informasi tentang masalah yang terjadi secara langsung pada tampilan LCD dan juga pengawasan yang meberikan informasi kondisi real tentang mesin melalui komputer dengan komunikasi serial.
Kata kunci: DT-51 MinSys Ver 3.3, crocontroller, Serial Communication
Abstract–Have been successfully made at PT. Dian Rakyat 2 Industrial Estate Pulogadung, East Jakarta, a microcontroller based controller for pony binder machine by implementing DT-51 MinSys Ver 3.3 as it main controller. By replacing the previous contactor based controller with microcontroller based controller there will be extra feature such as LCD display, serial communication and the ease in changing how the controller works. The method that was used in this research was making a prototype of the pony binder machine controller. By implementing DT-51 MinSys Ver 3.3 as its controller, we’ll expect some improvement in pony binder machine reliability by reducing the time that was needed to fix it by giving the information about the current problem in LCD display and also ease the supervision by giving the real condition about the machine through computer by using serial communication.
Keyword s: DT-51 MinSys Ver 3.3, crocontroller, Serial Communication
0 Responses
Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.